S+D METALS

Titanium KSTI-1,2 ASNEX

Titan KSTI-1,2 ASNEX, oxidation-resistant, corrosion-resistant, very good cold formability

KSTI-1,2 ASNEX was developed for high performance automotive and motorcycle exhaust systems and is based on pure titanium that is stabilized using aluminum, silicon and niobium additives. This pure titanium-based grade features excellent fatigue properties and high oxidation resistance at temperatures up to 700-800°C. The higher oxidation resistance enables the use of thinner walls, which saves additional weight and increases the longevity of the system. KSTI-1,2 ASNEX can thus offer a decisive competitive advantage in motorsports.

 

Areas of application for KSTI-1,2 ASNEX

Exhaust systems for automobiles and motorcycles

Contact us if you have any questions.

S+D METALS Kontakt

Available from stock in the following dimensions

  • 0,70 x 1000,00 mm
  • 0,80 x 1250,00 mm
  • 0,90 x 1250,00 mm
  • 1,00 x 1250,00 mm
  • 1,20 x 1250,00 mm
  • 1,50 x 1250,00 mm
  • 2,00 x 1250,00 mm
  • 3,00 x 1250,00 mm

Details at a glance

Chemical composition - limits in %

Al
0,30 - 0,70
Si
0,30 - 0,60
Nb
0,10 - 0,30
Fe
max. 0,20
O
max. 0,15
C
max. 0,08
N
max. 0,05
H
max. 0,013

Typical mechanical properties (from coil at room temperature) longitudinal section

0.2% Compressive strength
min. 320 MPa
Tensile strength
min. 438 MPa
Elongation
min. 33%

Typical mechanical properties (from coil at room temperature) landscape format

0.2% Compressive strength
min. 396 MPa
Tensile strength
min. 439 MPa
Elongation
min. 40%

Typical mechanical properties (from coil at room temperature) specification

0.2% Compressive strength
min. 215 MPa
Tensile strength
min. 340 MPa
Elongation
min. 20%

Downloads

Downloads

Datasheet Titanium KSTI 1,2 ASNEXDatasheet Titanium KSTI 1,2 ASNEX